- Cup's width:
- There is empty fabric on the sides (Cup too wide)
Bra » Elomi » Juliet Plunge Bra (4080) » 36FF » Bras » Owner
Measurements
| Measurement | Cm |
|---|---|
| Search by measurements | |
| Fits ribcage | 0.0 |
| B. perimeter | 0.0 |
| Stretched Band | 96.5 |
| Band Length | 77.8 |
| Stretch ratio | 1.2 |
| Cup width | 16.8 |
| Cup depth | 31.8 |
| Depth ratio | 1.9 |
| Wire length | 29.2 |
| Cup height | 0.0 |
| Cup separation | 2.9 |
| Gore height | 5.7 |
| Wing height | 11.4 |
| Strap width | 1.9 |
| Hooks | 2 |
Labeled as
| Index | 36:8 |
|---|---|
| FR | 95H |
| JP | I80 |
| US | 36H |
| AUS | 14FF |
| UK | 36FF |
| EU | 80H |
Review
0
like
like
Didn't fit
A plunge bra with firm, supportive cup fabric and only a little stretch at the top edge.
My issues with the Juliet are similar to my issues with the Carmen and other Elomi plunges: The underwires are not that wide at rest, but since they are flexible, the short and stretchy wings extend them about an inch past my breast tissue on the side. The Juliet wires are not quite as flexible as the Carmen's, but nonetheless they are too wide for me and stretch the cup fabric to create east-west wrinkles.
Know that the cup fabric does not stretch at all. The top panel of the cup is made of the non-stretch fabric with only a narrow edge of stretch lace to accommodate any unevenness in the breasts.
(This same review is posted under the sister size of 38F.)This bra is not owned any more
Updated on Nov 17, 2015 Flag this
