- Strap separation:
- Not a problem
- Bottom of the cup:
- Can't quite fill it
Bra » Panache » Porcelain Plunge (3371) » 30FF » Bras » Owner
Measurements
| Measurement | Cm |
|---|---|
| Search by measurements | |
| Fits ribcage | 0.0 |
| B. perimeter | 0.0 |
| Stretched Band | 94.0 |
| Band Length | 66.0 |
| Stretch ratio | 1.4 |
| Cup width | 16.5 |
| Cup depth | 25.4 |
| Depth ratio | 1.5 |
| Wire length | 25.4 |
| Cup height | 0.0 |
| Cup separation | 3.0 |
| Gore height | 0.0 |
| Wing height | 0.0 |
| Strap width | 1.5 |
| Hooks | 2 |
Labeled as
| Index | 30:8 |
|---|---|
| UK | 30FF |
Review
0
like
like
Didn't fit
This bra is not for anyone who is bottom heavy. It slopes too sharply upwards, due to this my boobs try to press down and they cause a crease at the bottom trying to make space for their lower curvature. Also if you have narrow shoulders you may get problems with the straps. When my arms are forward like for driving or typing they press the straps forward and this presses the cups forward and causes gaping at the top of the cup. I think if I did some sewing and moved the straps this could be fixed.
Updated on Aug 29, 2012 Flag this
